SmartConnect Multiloop Modules
SmartConnect Loop Card Module
- 250 addresses
- 450mA loop
- "Heartbeat LED" that shows communication between the module and the motherboard
- Extensive front unit status indication
- Time saving AUTO-LEARN facility
- Double address detection
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| SCM-LCM | SmartConnect Loop Card Module |
SmartConnect Alarm Circuit Module
- 2 x Alarm output circuits (500mA maximum load per circuit)
- Extensivefront unit status indications
- Each circuit can be programmed as a 24v auxiliary (500mA maximum load per circuit)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Power limited
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| SCM-ACM | SmartConnect Alarm Circuit Module |
SmartConnect Zone Monitor Module
- 6 x Conventional Zones
- Each zone is monitored for open & short circuit
- Extensive front unit status indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
- Each zone input can be configured as either Alarm or Technical Alarm
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| SCM-ZMM | SmartConnect Zone Monitor Module |
SmartConnect Multi-Input Module
- 6 x input circuits
- Each input is monitored for open & short circuits
- Extensive front unit status indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (Cable supplied with unit)
- Each input can be configured as either Alarm or Technical Alarm
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| SCM-MIM | SmartConnect Multi-Input Module |
SmartConnect Multi-Relay Output Module
- 3 x Form C relay outputs
- Each relay can be programmed to Configured as alarm, Tech alarm, fault or can be programmable through cause and effect.
- Front unit status indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| SCM-RM | SmartConnect Multi-Relay Output Module |
SmartConnect RS485 Network Module
- Peer-to-peer networking.
- Comprehensive cross network cause & effects.
- Up to 64 panels may be networked together
- Remote programming over the network
- The network can be configured with either a ring or bus topology
- Fault tolerant design
- Extensive front unit status indications
- Quick and east to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| SCM-NM | SmartConnect RS485 Network Module |
SmartConnect RS232 Printer Module
- Used to interface to RS232 printer
- 5V aux output (used to power the printer only)
- Extensive front unit indications
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| SCM-PM | SmartConnect RS232 Printer Module |
SmartConnect Multi TCP/IP Module
- Designed to meet EN54 requirements
- TCP-IP output via RJ45
- Zeta Remote monitoring via a desktop PC or smartphone via the cloud
- Responsive web interface
- "Heartbeat LED" that shows communication between the module and the motherboard
- Extensive fornt unit inidications
- Quick and simple to install
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| SCM-LAN | SmartConnect Multi TCP/IP Module |
SmartConnect Gas Detection Module
- 2 available circuits
- Each circuit will allow a single connection of a 4-20mA device
- Extensive front unit status indications
- Compatible with any Smart Connect Multiloop panel
- Quick connect Din Rail Mount
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| SCM-4-20 | SmartConnect Gas Detection Module |
